![Ibywind Screen Protector For Xiaomi Poco F3/Redmi K40/K40 Pro,with 2Pcs Tempered Glass,1Pc Camera Lens Protector,1Pc Backing Carbon Fiber Film [Fingerprint Reader,Easy to install]](https://cdn.statically.io/img/m.media-amazon.com/images/I/71xqaexBnZL.__AC_SX300_SY300_QL70_ML2_.jpg)
![DuoLide for Xiaomi Poco F3 Case/Redmi K40 Case/K40 Pro Case with Glass Screen Protector [2 Pack],Hybrid Heavy Duty Dual Layer](https://cdn.statically.io/img/images-na.ssl-images-amazon.com/images/I/61P2ByBRHjS._AC_UL116_SR116,116_.jpg)
I've gone through 4 of these (I keep dropping my phone off the side of the bed, it cracks on the metal bed frame) and they have undoubtedly saved my screen. They are somewhat easier to scratch, I think the glass could be a little harder, but the definitely get the job done. The size is perfect, it covers the entire front of the phone (well, maybe could stand to be a millimeter taller) and does not have any gap between the screen and the glass along the sides.
Turn off any fans in the house, turn off air conditioning, and wait half an hour for dust to settle--unless you have access to a cleanroom. I advise against using the cloth they give you in the package, it leaves a lot of lint. Use isopropyl alcohol or ammonium-free glass cleaner (I recommend Sprayway) and a lint-free microfiber cloth to clean the screen beforehand. The sticker they give you is helpful, I pinch it from a corner and quickly lift it up and down over the edges of the screen where dust settles. If there is dust trapped under the edges, lift it up with a fingernail (be careful not to scratch the soft sticky layer on the underside) and use a corner of the sticker upside-down.
The plastic guide for alignment is very nice to have. It helps significantly, but if you're obsessive you might notice that it still has a slight amount of lateral play. Once you position the screen protector using the plastic guide, I recommend taking the guide off and carefully lifting up the corners with a fingernail to do some fine adjustment. Obviously this takes practice. I also recommend adjusting the screen protector with the display turned on to a white screen, so that you can carefully re-align the edges. If you just rely on the plastic frame, it may be slightly off-kilter. When you align it with the plastic guide, start from the top, and make sure the camera hole lines up in the center.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Top rated similar items
Page 1 of 1 Start overPage 1 of 1
Frequently bought together
$11.99
Get it as soon as Monday, Jul 15
Only 1 left in stock - order soon.
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Reviews with images
Durable Glass Protector That Could Use A Little More Curvature
This is a very good value glass cover.It comes with 2 sets of glass (in case you make a mistake or in case you needed a spare to replace the current when it's damaged), cleaning kits, back carbon fiber skin cover, lens protection shield, and a plastic glass installation guide.I have read from other comments that some people complained about dust going under the glass. I say they are ridiculous. Ibywind does not control the dust in their homes.Anyway, if you really want to install it with very minimal dust, you keep the stock cover (Xiaomi Poco F3 comes with a pre-installed protector) until the very moment when you are about to install the glass.Follow the steps below as a guide for the best method of dust-less installation.1. Select a sealed, well lighted room that has no air movement. If it is a bathroom, turn off the ventilating fans or exhaust fans.2. Let your steam run until it reaches around 85% humidity. Vapor can adhere to dust and make them heavy so they fall on the floor. (if you don't have a steamer, shower first with hot water. Don't let the steam escape)3. Use tight-fitting gloves. This is important to avoid leaving oily residue on surfaces.4. Clean the entire phone with electronic cleaning solution.5. Wipe with a clean microfiber cloth (I used the microfiber cloth that is used for cars. See picture)6. Install the Camera lens shield on the back.7. Install the back carbon skin (or not if you don't like it)8. (I did not use the plastic guide) Pull plastic film halfway such that the end with the hole is resting on its edge. Then push on the surface to initiate contact.9. Continue to the other end, and keep applying pressure on the center.10. If there are bubbles, don't push it out using the cloth, instead, peel off the portion where there are bubbles and keep putting pressure on the other end that has a good coverage.11. Repeat until all bubbles are gone.The only cons I have with this protector is that although they claim that the edges are curved, it seems that the curvature is not enough because there are still noticeable lifting at the ends. (See picture)This might not really be a deal breaker since the glass is not permanent and I don't check my phones by looking at the edges anyway.I think it's a practical approach that we should not expect perfection from everything, even from the most expensive ones. What this does is it protects the screen from potential scratches, which is really the main purpose here, for an affordable price.In the end, it doesn't really bother me that much because videos very rarely exceed 16:9 ratios and Poco F3 has a screen ratio of 20:9, which means the part with the lift will always show black. And I never read anything at the extreme edges.Overall, I am very satisfied with this protector and I will buy again for spare purposes (I actually broke the other one to see how durable it is and I was surprised that it did not shatter. It seems like there is a layer of adhesive on the other side of the glass that keeps the glass from shattering)
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on August 27, 2023
Reviewed in the United States on October 29, 2021
Reviewed in the United States on June 12, 2022
Reviewed in the United States on August 12, 2022
Top reviews from other countries
natalie
Kaufe ich mir seit Jahren regelmäßig.
Reviewed in Germany on March 31, 2024