Vantrue N5, N4 Pro, S1 Pro, N4, N2S, N1 Pro&N2 Pro(2023), X4S, S2, E1, E1 Lite, E2, E3, T3 Dashcam 11.5ft Type C USB Dash Cam Hardwire Kit, 12V-24V to 5V Fuse Holders, Low Voltage Battery Protection

Amazon's Choice highlights highly rated, well-priced products available to ship immediately.
Amazon's Choice

To see product details, add this item to your cart. You can always remove it later.

Purchase options and add-ons

Colour Black
Connectivity technology USB
Brand VANTRUE
Item weight 0.22 Kilograms
Included flash type Internal
Screen size 138 Inches

About this item

  • 【Compatible 12 – 24V Vehicles w/Shifting Gear Control Box】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V. This hardwire kit provides 4 types of plugs including ATO / MINI / LPMINI / MICRO 2 to fit your different needs. It will automatically cut off connected metal when voltage below 11.6V or 23.2V with switch button turning right; and automatically cut off connected metal when voltage below 12V or 24V with switch button turning left.
  • 【24/7 Parking Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. Please note: To make hardwire kit work properly, all 3 leads must be connected to the corresponding ports.
  • 【ACC mode】To use this mode (turn on and off with the ignition), please turn off Parking Mode in settings.
  • 【Low voltage protection】It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 22.8V, thus preventing it draining the battery.
  • 【Mulitiple uses】Type C USB plug compatible with all Type C dash cams, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices. Please note: It doesn't work for other Vantrue Dash Cams, it only work for N5, N4 Pro, S1 Pro, N4, N2S, N2 Pro(2023), N1 Pro(2023), X4S, X4S Duo, S2 2CH, S2 3CH, E1, E1 Lite, E2, E3, T3 dash cam.

Frequently bought together

$27.99
Get it by Sunday, Jul 14
In Stock
Sold by VANTRUE and ships from Amazon Fulfillment.
Total price:
To see our price, add these items to your cart.
Details
Added to Cart
Choose items to buy together.

From the brand


Product Description

BANNER

24 hours parking monitor

12-24V

low voltage protection

24/7 Parking Surveillance

  1. Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
  2. Directly to the ignition wire for power only so it can turn on and off with the ignition.

Compatible 12 – 24V Vehicles

This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power.

Low Voltage Protection

Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.6V(12V cars) or 23.2V(24V cars), which can protect your car battery from being drained.

fuse box

installation steps

ground wire

Find the Correct Fuse Slot

Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on.

Connect the Red Wire and Yellow Wire

Once you've determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation. And the Yellow should be connected to the ACC.

Ground the Hardwiring Kit

Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards.

connection mode

Key Features

  • Compatible with 12-24Vdc for car or truck installations.
  • Perfect for 24/7 Parking Surveillance.
  • Low voltage protection protects against battery dying.
  • Works well with Vantrue N4 dash cam and all the other type c usb dash cams!
  • Keep 12V or 24V outlet free, charge your phone at the same time.
  • Less static when you’re listening to the radio. Less Complicated Install with the installation video.

What’s in the box?

  • Vantrue 11.5ft Type C USB Dash Cam Hardwire Kit with User Manual
  • Mini/LP ACN Add-A-Circuit Fuse Holder
  • Mini ACS Add-A-Circuit Fuse Holder
  • ATO ACU Add-A-Circuit Fuse Holder
  • Micro2 Add-A-Circuit Fuse Holder

Technical Details

  • Connector: Type C USB Connector
  • Input Voltage: DC 12V-24V
  • Output Voltage: 5V
  • Output Current: 2A
  • Working Temperature: -22°F to 167°F (-30°C to 75°C)
  • Cable Length: 11.5ft
  • Low Voltage Protection: 11.6V for 12V vehicle; 23.2V for 24V vehicle.

Looking for specific info?

Product information

Technical Details

Additional Information

Feedback

Vantrue N5, N4 Pro, S1 Pro, N4, N2S, N1 Pro&N2 Pro(2023), X4S, S2, E1, E1 Lite, E2, E3, T3 Dashcam 11.5ft Type C USB Dash Cam Hardwire Kit, 12V-24V to 5V Fuse Holders, Low Voltage Battery Protection


Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?

Price Availability
Date of the price (MM/DD/YYYY) *:
/
/
/
/
Please sign in to provide feedback.

Important information

Visible screen diagonal

138" / 351 cm

Customer reviews

4.4 out of 5 stars
4.4 out of 5
307 global ratings
Glad I spent an extra $2 and got this one
5 Stars
Glad I spent an extra $2 and got this one
This is great quality. I was confused a little by the description because it looked like you only got 1 of the fuse cables when you need 2 of each - 1 for positive and 1 for accessory. Fortunately you get 2 of each, so no problems! Now I just need to instal it.
Thank you for your feedback
Sorry, there was an error
Sorry we couldn't load the review

Top reviews from Canada

Reviewed in Canada on March 1, 2024
Verified Purchase
I used this for a permanent dash camera installation. It has adequate power for both front and rear cameras. The supplied connectors facilitates installation. The unit feels solid and like something is inside it. It came very well packaged and looks like a quality product. I bought a cheaper unit in a plain brown box but sent it back because it felt and looked cheap. I spent $200 have my dash camera professionally installed and the difference between a cheap kit was peanuts in the overall job. I'd attach a picture but it's all tucked away hidden in my dash and I have a dash camera without 10 extra feet of wire dangling all over the dash!
2 people found this helpful
Report
Reviewed in Canada on March 30, 2024
Verified Purchase
Purchased this for parking lot mishaps and to keep wires away from the dash. It works just as advertised, and so the camera works at all times. For those doing a DIY install, when checking for constant voltage in the fuses under the dash, keep the ground of a voltage meter on the vehicle; that is, don't test the two sides of the fuse slot, because there will not be an open circuit even though there is constant voltage supply. It took me a long time to figure this out, but once I did, the install was simple.
One person found this helpful
Report
Reviewed in Canada on April 26, 2024
Verified Purchase
Firstoff, the size is great. It is nice and small that it doesn't obstruct the front windshield. The camera quality during daytime and nighttime hours is fantastic. I purchased the additional cable which allows the standby mode while parked. Overall a great investment to protect my truck
Reviewed in Canada on December 2, 2023
Verified Purchase
Fir perfect but low voltage disconnect fail,
Sent Vantrue request for replacement,
Very happy as they sent one for replacement
Reviewed in Canada on October 29, 2023
Verified Purchase
The hardwire kit offers a seamless way to power my dash cam, eliminating the need for a separate power cable connected to the car’s lighter socket. This not only frees up the socket for other devices but also provides a cleaner and more discreet setup.

One of the standout features is the voltage protection system, which prevents the kit from draining the car’s battery when the vehicle is turned off. This feature provides peace of mind, knowing that my car will start without any issues, even after extended parking.

Installation was straightforward, and the included cable length was more than sufficient to reach the dash cam. The kit also includes various fuse types and a clear installation guide, making it accessible for users with different car models.

In summary, the Vantrue Type C USB Dash Cam Hardwire Kit has greatly improved my dash cam setup. It offers a clean and reliable power source, voltage protection, and ease of installation. If you own a Vantrue dash cam and want a hassle-free way to hardwire it into your vehicle, this kit is a fantastic choice. I highly recommend it to enhance your dash cam experience and simplify your car’s cable management.
One person found this helpful
Report
Reviewed in Canada on May 15, 2023
Verified Purchase
I have a Vantrue X45 Duo, and the description says it's compatible, so i bought this kit to have my camera 24x7.
instructions are clear and easy to understand, and there are many youtube how to install it.
Long story short it's not working.
I installed the kit more than a month after I got it from Amazon, there is no way to return or replace it, so I need to swallow the cost.

first issue. you get 4 types of wires for 4 different fuse types.
Given the fact you have the red and the yellow connecting to the same switch box, you need to connect to 2 of the same fuses, go figure out where to get the second wire.
Now you need to buy another wire to fit into your switch box, which will cost you almost as A full kit.
I have a Nissan Murano 2017, and all the fuses are Low-Profile Mini Blade type, so I spend another $25 to be able to connect the second wire.

In addition to the fuse list which exists on the fuse box, very clear where is the ACC, i used A voltmeter to check the voltage a few times to ensure i am connecting to the right fuse.
It's very important to connect the fuse extender in the right direction (+, and -), otherwise it will not work.
It's important to ensure the ground has a connection, otherwise, nothing works.
I checked and double-checked, I connected, and disconnected, and I connected again.
It's not working, I will have to look for a different one, I wasted my money on this product for nothing.

Before you spend a dime on this one ensure you read all the details, worst case, don't wait, install it on the same day, to have the ability to return if it's not working.
5 people found this helpful
Report
Reviewed in Canada on September 1, 2023
Verified Purchase
This is a really good add on for the Vantrue cameras, and gives you the ability to keep parking mode enabled without the risk of killing your battery due to low voltage. You can also leave parking mode off on your camera and just have the camera switch on and off with the ignition. It gives a nice professional looking installation to your camera.

Yes you could just wire the camera voltage to a switched accessory without this kit, but with the added functionality and the low cost of this kit, you would not be saving any money. Its worth it if you are going to hardwire.

On a related note, the passenger fuse boxes on F150 trucks from 2009 to 2014 ish that have low profile micro mini fuses, the fuse adapter/tap for the mini fuse will not fit. Instead just use the adapter for the mini fuses with the longer conductors. they are only a mm off the width, and are long enough to seat firmly without leaving an exposed conductor. I had to modify my fuse cover a bit but it still worked good.
2 people found this helpful
Report
Reviewed in Canada on January 3, 2024
Verified Purchase
there's hundreds of dash kits available on amazon but I wanted to get some from a reputable company because they tend to catch fire. this one is easy to setup, just fish the wire from the camera to the fuse panel and you are done. it provides protection for the car battery, camera turns off when the voltage gets too low. also the kit comes with all the fuse taps you need and the ground cable comes crimped. the cable insulation is thick and won't be easily damaged if it gets caught in something during installation.