| Brand | ECHOGEAR |
|---|---|
| Manufacturer | ECHOGEAR |
| Model | EGAV-CMIWGW |
| Part Number | EGAV-CMIWGW |
| Number of Items | 2 |
| Batteries included | No |
| Batteries Required | No |
| Manufacturer | ECHOGEAR |
| Item model number | EGAV-CMIWGW |
| Product Dimensions | 9.53 x 9.53 x 0.25 cm; 299 g |
| ASIN | B081QPF19F |
Frequently bought together
$26.99
Get it by Monday, Jul 22
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Videos for similar products
From the brand
-
Since 2015, we've been grinding to simplify the DIY process. Why? Because we want you to spend your free time living, not sifting through a box of parts.
Elevate your setup with ECHOGEAR and get back to your version of living.
It's time to upgrade your gear with the brand made for the modern DIYer.
-
Mount Up Your TV
-
Hide All Your Cables
Product Description
|
|
|
|
|---|---|---|
|
Messy, dangling cables are gross. Just ask anyone. This all-inclusive kit helps you make them disappear inside the wall. Poof! Like magic. DIY, For Reals - No pro necessary. Seriously. This kit includes everything you need to install, all by yourself, in less than 20 minutes. |
No pro necessary. Seriously. This kit includes everything you need to install, all by yourself, in less than 20 minutes. |
This kit is perfect for hiding low voltage cables and cords. Need a powered solution? Take a look at our In-Wall Power and Cable Management Kit. |
|
|
 |
 |
 |
|
|
|---|---|---|---|---|---|---|
| Cable Pass Through Grommets | Brush Plate Cable Pass Through | Single Gang Cable Pass Through | In-Wall TV Power Kit | In-Wall TV Power Box | ||
|
|
|
|
|
|
|
|
| Customer Reviews |
12,303
|
1,176
|
— |
— |
— |
884
|
| Low Voltage Cable Capacity | 4 | 8 | 8 | 4 | 3 | 4 |
| In Wall Power Cable | Single Outlet | Dual Outlet | 2 Single Outlets | |||
| Wall Cutting Template | ✓ | ✓ | ✓ | ✓ | ||
| Drywall Saw Included | Hole Saw Drill Attachment | Hole Saw Drill Attachment | Hand Drywall Saw | Hole Saw Drill Attachment + Hand Drywall Saw | ||
| Customizable Orientation | ✓ | |||||
| Drywall Install Brackets In The Box | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Raises Your Stoke Level | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Compare with similar items
This Item  ECHOGEAR TV Cord Hider for Wall Mounted TV - White Cable Management Kit Hides TV Wires Behind The Wall- Includes 2 Pass Throughs, Locking Brackets, and Hole Saw Drill Attachment for Easy Install |  |  |  |  |  | |
| Price | $26.99 | $36.99 | $24.99 | $47.34 | $25.99 | -15% $16.99 List: $19.99 |
| Delivery | Get it by Monday, Jul 22 | Get it by Thursday, Jul 25 | Get it by Monday, Jul 22 | Get it Jul 30 - Aug 12 | Get it by Monday, Jul 22 | Get it by Monday, Jul 22 |
| Customer ratings | ||||||
| Easy to install | ||||||
| Easy to use | ||||||
| Value for money | ||||||
| Sold by | ECHOGEAR | HomeMount | YCLYC Official | Turumov | VCE LINK | ZhiYo, Inc. |
| installation | Screw-In | Screw-In | Self-Adhesive | Self-Adhesive | Screw-In | Self-Adhesive |
Reviews with images
Great product and easy installation
I needed an access hatch for my TV and component wires that were coming from my television over the fireplace mantle to the side of the fireplace. I ordered this product and installed it in 20 minutes. It honestly couldn’t be any easier than this. The product comes with the hole saw that attaches to a drill. Really the only thing you need is a screwdriver and a drill. Once the hall is cut, you put the mounting piece in and screw in the two screws. The other rubberized finishing plate in easily and leaves you with a very aesthetically pleasing end product. I also installed an access panel above it so I would not have to run a conduit tube to the back of the TV. I was very happy with the product.
Top reviews from Canada
There was a problem filtering reviews right now. Please try again later.
Reviewed in Canada on June 26, 2024
Colour Name: WhiteVerified Purchase
I needed an access hatch for my TV and component wires that were coming from my television over the fireplace mantle to the side of the fireplace. I ordered this product and installed it in 20 minutes. It honestly couldn’t be any easier than this. The product comes with the hole saw that attaches to a drill. Really the only thing you need is a screwdriver and a drill. Once the hall is cut, you put the mounting piece in and screw in the two screws. The other rubberized finishing plate in easily and leaves you with a very aesthetically pleasing end product. I also installed an access panel above it so I would not have to run a conduit tube to the back of the TV. I was very happy with the product.
Images in this review
Reviewed in Canada on June 6, 2023
Colour Name: Off-whiteVerified Purchase
Bought the two Amazon items ECHOGEAR TV Cord Hider (2 passthrough - 1 set, 4 passthrough - 2 set) for Wall Mounted TV's. The single pair comes with a 3 inch hole saw, the double package of 2 sets comes with a single 3 inch hole saw.
Some mention that the hole saw slips and does a rough cut, the solution there is quite easy in using an allen key to loosen the includes shank bolt holding the hole saw and tighten it back on the flat portion of the shaft. It should be good out of the box however after reading some reviews i readjusted that allen key bolt to ensure it was seated properly.
Install is easy as can be, use a stud finder to ensure no studs are on that portion for the hole itself and that no electrical is present as well. Most stud finders will solve both issues, you want to ensure the location is right. Then use the drill and hole saw to cut the 3 inch diameter hole. You then fish a fish tape or wire down/up the wall from hole to hole, using this pull wire to pull in your miscellaneous cables.
One item to remember is that you will likely require additional lengths on the cables, i suggest 15 feet lengths for the HDMI and other cables. Many of us are sitting with 8 - 10 foot lengths, you will find that is likely short and you will need 12 - 15 feet...so go with 15 feet.
It is recommended for low voltage cables and the power cable on your TV is usually a C7 (polarized, non polarized) similar to a laptop power cable, you can run a 1/2 inch corrugated conduit in the wall space to house that particular cable. I have seen pictures with the C7 power cable installed though the wall direct, in practise doesn't really make a difference however code is to only use a inside wall rated cable or to do the corrugated conduit.
Once installed the look if exceptional, looks finished and no more unsightly cables.
It takes about 20 - 30 minutes to complete the install, a few additional minutes to tie wrap the cables out of sight behind your TV stand.
I added a couple of pictures of my first install, doing the other two installs later this week.
Some mention that the hole saw slips and does a rough cut, the solution there is quite easy in using an allen key to loosen the includes shank bolt holding the hole saw and tighten it back on the flat portion of the shaft. It should be good out of the box however after reading some reviews i readjusted that allen key bolt to ensure it was seated properly.
Install is easy as can be, use a stud finder to ensure no studs are on that portion for the hole itself and that no electrical is present as well. Most stud finders will solve both issues, you want to ensure the location is right. Then use the drill and hole saw to cut the 3 inch diameter hole. You then fish a fish tape or wire down/up the wall from hole to hole, using this pull wire to pull in your miscellaneous cables.
One item to remember is that you will likely require additional lengths on the cables, i suggest 15 feet lengths for the HDMI and other cables. Many of us are sitting with 8 - 10 foot lengths, you will find that is likely short and you will need 12 - 15 feet...so go with 15 feet.
It is recommended for low voltage cables and the power cable on your TV is usually a C7 (polarized, non polarized) similar to a laptop power cable, you can run a 1/2 inch corrugated conduit in the wall space to house that particular cable. I have seen pictures with the C7 power cable installed though the wall direct, in practise doesn't really make a difference however code is to only use a inside wall rated cable or to do the corrugated conduit.
Once installed the look if exceptional, looks finished and no more unsightly cables.
It takes about 20 - 30 minutes to complete the install, a few additional minutes to tie wrap the cables out of sight behind your TV stand.
I added a couple of pictures of my first install, doing the other two installs later this week.
Images in this review
Reviewed in Canada on May 11, 2022
Colour Name: Off-whiteVerified Purchase
Reviewed in Canada on April 9, 2024
Colour Name: WhiteVerified Purchase
Reviewed in Canada on December 4, 2020
Colour Name: Off-whiteVerified Purchase
I have used many cable concealing products in the past, mostly cheap pass-through wall plates, this is by far the best solution I have used!
I bought this for my new basement TV setup, I wanted all my cables hidden and I wanted a ‘clean’ method of doing so. This kit is amazing, not only are you provided with the cutout tool, but the instructions are very clear and insightful. The install method for the cover is simplistic and highly effective. Overall a quick and easy install experience, I will continue to buy from Echogear in the future.
At $26.99 (at time of purchase) this is amazing value. It was the perfect solution for my needs, and I can highly recommend this to anyone interested!
I bought this for my new basement TV setup, I wanted all my cables hidden and I wanted a ‘clean’ method of doing so. This kit is amazing, not only are you provided with the cutout tool, but the instructions are very clear and insightful. The install method for the cover is simplistic and highly effective. Overall a quick and easy install experience, I will continue to buy from Echogear in the future.
At $26.99 (at time of purchase) this is amazing value. It was the perfect solution for my needs, and I can highly recommend this to anyone interested!
Images in this review
Reviewed in Canada on April 25, 2024
Colour Name: WhiteVerified Purchase
Reviewed in Canada on May 2, 2024
Colour Name: BlackVerified Purchase
Top reviews from other countries
Joshua
Ditch the Cord Chaos: This Kit Makes Your TV Wall Look Like a Million Bucks (Without Spending One)
Reviewed in the United States on February 23, 2024Colour Name: WhiteVerified Purchase
Joshua
Reviewed in the United States on February 23, 2024
Here's the deal:
• Installation? Easy peasy. You don't need a degree in engineering, just a drill and 20 minutes of your precious time. Boom, cords banished behind the wall.
• Bye-bye, cable spaghetti! This bad boy hides most of your TV cables (except the power-hungry ones, sorry). Think HDMI, Aux, even speaker wires - they're all outta sight, outta mind.
• Need to adjust something? No problem! The handy pass-throughs let you add or remove cables whenever, keeping your entertainment setup flexible as ever.
• Looks good, does good. This kit blends in seamlessly with our walls (bonus points for being paintable!) and is nice and small, so it doesn't add unnecessary bulk.
Heads up: This hider isn't for power cables, and it might not be the best fit for a jungle of cords. But for most setups, it's works!
Overall:
It's easy to use, affordable, and makes your wall look like it belongs in a magazine. Just remember, it's not for every cable situation, but for most folks, it's a cord-cutting dream come true. So ditch the mess and embrace the clean with this little gem!
Images in this review
Pris nut
Fácil de instalar
Reviewed in Mexico on December 21, 2022Colour Name: Off-whiteVerified Purchase
Marco
Einfache Installation inkl. Werkzeug
Reviewed in Germany on July 8, 2024Colour Name: Off-whiteVerified Purchase
Chris
Bon produit
Reviewed in Belgium on February 5, 2024Colour Name: BlackVerified Purchase
Rodion
Slick Produkt
Reviewed in Sweden on December 28, 2023Colour Name: Off-whiteVerified Purchase
Rodion
Reviewed in Sweden on December 28, 2023
Simple to mount.
Will definitely order more for future projects of mine.
Images in this review
