Customers who viewed this item also viewed
Page 1 of 1 Start againPage 1 of 1
From the brand
-
Cable Matters, with headquarters in Southborough, Massachusetts, offers a complete line of cables, adapters, docking stations, and networking products for the home, office, and data center. Cable Matters offers first-class, quality, and affordable products backed by an exceptional customer experience.
-
-
-
-
Product Description
Comparison Products
 Right Angle XLR Cable |  Premium XLR to XLR Cables |  Angle XLR Adapter |  5 Pin - 3 Pin DMX Adapter | |
|
Customer Reviews
|
17
|
1,985
|
134
|
127
|
|
Connector Type
| 3-Pin Male to 3-Pin Female XLR | 3-Pin Male to 3-Pin Female XLR | 3-Pin Male to 3-Pin Female XLR | 5-Pin Male to 3-Pin Female XLR |
|
Count
| 2-Pack | 1-Pack/2-Pack | 2-Pack | 2-Pack |
|
Signal Type
| Balanced | Balanced | Balanced | — |
|
Available Lengths
| 0.5, 1, 3, 6 ft | 3, 6, 10ft | — | 6 inches |
|
Model Number
| 500084 | 500011 | 500112 | 500083 |
Reviews with images
Good and durable, might not fit all use cases out of the box
The quality of these adapters is solid, and they definitely do what they are designed for, but be sure that your setup will allow for proper use. The cable angles in the direction of the lone "3" pin of the XLR plug, so it often means that on mixers with controls below the plug, those controls will be covered by the cable, as seen in the photos.It would also be an issue for many DI pedals, as the orientation would have this adapter pointing towards the ground, which isn't practical.It would be quite useful in many other situations, however, like rack mounted gear, or reducing the space needed in the rear of amps or other audio gear.It should be noted that because the cable ends are user-serviceable, you can take apart the right-angle case and rotate the orientation, but this carries a risk of weakening the connection or putting undue strain on the attachment points inside. It's a tight fit, but I was able to feed the cable some slack, flip the connector end and rotate the cable so that the orientation is the opposite, which suits my uses a bit better.Something to keep in mind for this change is that the release switch will then under the right angle, and is harder to access.
Top reviews from Canada
There was a problem filtering reviews right now. Please try again later.
Reviewed in Canada on July 8, 2024
Size: 1 Ft/0.3 mVerified Purchase
Reviewed in Canada on May 9, 2024
Reviewed in Canada on June 26, 2024
Reviewed in Canada on June 16, 2024
It would also be an issue for many DI pedals, as the orientation would have this adapter pointing towards the ground, which isn't practical.
It would be quite useful in many other situations, however, like rack mounted gear, or reducing the space needed in the rear of amps or other audio gear.
It should be noted that because the cable ends are user-serviceable, you can take apart the right-angle case and rotate the orientation, but this carries a risk of weakening the connection or putting undue strain on the attachment points inside. It's a tight fit, but I was able to feed the cable some slack, flip the connector end and rotate the cable so that the orientation is the opposite, which suits my uses a bit better.
Something to keep in mind for this change is that the release switch will then under the right angle, and is harder to access.
Good and durable, might not fit all use cases out of the box
Reviewed in Canada on June 16, 2024
The quality of these adapters is solid, and they definitely do what they are designed for, but be sure that your setup will allow for proper use. The cable angles in the direction of the lone "3" pin of the XLR plug, so it often means that on mixers with controls below the plug, those controls will be covered by the cable, as seen in the photos.Reviewed in Canada on June 16, 2024
It would also be an issue for many DI pedals, as the orientation would have this adapter pointing towards the ground, which isn't practical.
It would be quite useful in many other situations, however, like rack mounted gear, or reducing the space needed in the rear of amps or other audio gear.
It should be noted that because the cable ends are user-serviceable, you can take apart the right-angle case and rotate the orientation, but this carries a risk of weakening the connection or putting undue strain on the attachment points inside. It's a tight fit, but I was able to feed the cable some slack, flip the connector end and rotate the cable so that the orientation is the opposite, which suits my uses a bit better.
Something to keep in mind for this change is that the release switch will then under the right angle, and is harder to access.
Images in this review
Reviewed in Canada on May 9, 2024
The Cable Matters 2-Pack Right Angle XLR Cables turned out to be just what I needed. Their length was spot-on for my setup, and I appreciated the flexibility to adjust the angle in 45° increments by simply unscrewing them. However, it's worth noting to handle this adjustment process with care to avoid damaging the wires inside.
What impressed me most was the overall value these cables provided. Despite being comparable in price to buying the fittings separately and making my own cables, these pre-made ones saved me time and effort. Additionally, the quality of the cable itself seems solid, though only time will tell just how durable they are. But for now, they're working perfectly fine and I'm satisfied with my purchase.
One aspect I particularly appreciate is that these cables feature standard fittings. This means that if I ever need to, I can solder my own cables onto them. This flexibility sets them apart from some other brands I've encountered, which have molded plastic fittings that cannot be soldered. With the Cable Matters cables, I have the assurance that I can replace the wires if needed without having to replace the entire connector assembly. Overall, this adds to the long-term value and versatility of these cables.
What impressed me most was the overall value these cables provided. Despite being comparable in price to buying the fittings separately and making my own cables, these pre-made ones saved me time and effort. Additionally, the quality of the cable itself seems solid, though only time will tell just how durable they are. But for now, they're working perfectly fine and I'm satisfied with my purchase.
One aspect I particularly appreciate is that these cables feature standard fittings. This means that if I ever need to, I can solder my own cables onto them. This flexibility sets them apart from some other brands I've encountered, which have molded plastic fittings that cannot be soldered. With the Cable Matters cables, I have the assurance that I can replace the wires if needed without having to replace the entire connector assembly. Overall, this adds to the long-term value and versatility of these cables.
Images in this review
Reviewed in Canada on May 14, 2024
I didn't know that XLR cables with a 90-degree bend existed until recently. I've only ever seen the straight ones. The problem is, sometimes you get into a forest of cables with them all coming straight out and you can't see the labels on the equipment. I've had a few nights when something wasn't working and I pulled the wrong input or output because I could not read the label.
These cables solve that problem because, on most equipment, you can read the label above or below the 90-degree connector. What a great idea!
XLR cables are daisy-chainable, so if you need to extend the short ones, it's no problem. I have these 1-foot cables in my main gear bag for those tight spots that come along about every second night (well, before 2020 anyway; things are still a lot quieter, but I'm ready when it picks up!)
They are really well made with very solid ends and good quality cable. I tested them carefully before using them and they tested good and they sound great, which is admittedly not that much of a feat for a 1-foot cable, but you have to test beforehand.
These cables solve that problem because, on most equipment, you can read the label above or below the 90-degree connector. What a great idea!
XLR cables are daisy-chainable, so if you need to extend the short ones, it's no problem. I have these 1-foot cables in my main gear bag for those tight spots that come along about every second night (well, before 2020 anyway; things are still a lot quieter, but I'm ready when it picks up!)
They are really well made with very solid ends and good quality cable. I tested them carefully before using them and they tested good and they sound great, which is admittedly not that much of a feat for a 1-foot cable, but you have to test beforehand.
Images in this review
Top reviews from other countries
Gabin Houssoy
Un peu plus long que ce qui été écrit
Reviewed in France on July 9, 2024Size: 1 Ft/0.3 mVerified Purchase
Alyn
Long tail on the 90-deg connector
Reviewed in the United Kingdom on June 24, 2024
StandishGeezer
Excellent (short/patch) cable
Reviewed in the United Kingdom on May 27, 2024
StandishGeezer
Reviewed in the United Kingdom on May 27, 2024
Before making any connection to equipment, I ran through my cable tested to confirm proper connection of pins and opened to confirm good soldering and insulation (both tests got the thumbs up). On opening, I notice that Pin 1 (ground) is connected to the sleeve; this has been a bone of contention for those in the audio field for years. Most of the commercial leads I have bought are wired in this manner and seems to be supported by the audio industry. The cables I have made myself (and there are many) never have Pin 1 connected to the sleeve (I think because, in my early years, somebody told me that I should not). Despite hundreds of gigs with varying equipment and significant cable lengths, I have only once had any issue with any of my cables and that happened to be one with the Pin 1 connection to the sleeve. Cutting the connection, in that case solved the issue on the night but I think, in the end I was working with a piece of sketchy equipment. So, the jury is out for me and the manufacturer of these cables seem to be working to industry standards.
Having said all this, just for completeness, these are very well made and robust cables. They are short (33cm of cable if my measurement is correct) and I would class them as patch/interconnects rather than microphone cables unless perhaps you are using with a desktop microphone right next to a mixer. If you wanted to make use of the space saving right hand connector but needed a longer run , I guess to could daisy chain with a longer lead (providing it is wired identically).
Images in this review
James Clark
Good quality patch cable
Reviewed in the United Kingdom on June 17, 2024
James Clark
Reviewed in the United Kingdom on June 17, 2024
I have one criticism of the female right-angled connector used. When plugged in, whether to a microphone, a cable or a socket on a piece of equipment, it has a couple of millimetres of play meaning it's not quite as firmly connected as most other cables and can result in a small amount of crackling if knocked. In most circumstances, it won't be a problem but there is more play than normal; more than I can find with any of my other mic cables. Without this issue, I would have rated it five stars.
My only other criticism is the excessive use of plastic packaging with each cable individually wrapped in a plastic bag and then the pair supplied in another zip-lock plastic bag.
At £14.99 for two short cables, it is a more expensive product but considering the use of premium components and attention to detail such as sleeving the individual soldered connections I think that is acceptable.
Images in this review
MrbWonka
Convenient
Reviewed in the United States on June 28, 2024